Custom Applications

 Rotary Table Staking Application


This 2020 and Pneumatic Rotary Table combination significantly reduces cycle times by allowing the operator to remove the finished part and load another part while the thermal assembly is taking place.


The rotary table has two nests and automatically rotates 180 degrees each time the palm buttons are pressed to bring the opposite nest under the head. Once the head comes down, the operator can remove their hands from the palm buttons, unload the finished part and load a new one. The part shown here is a switch housing with several metal laminations. It had a load-to-load cycle time of 12 to 15 seconds.

The Pneumatic Rotary Table automatically rotates 180 degrees each time the palm buttons on the 2020 are pressed. This allows the operator to remove the finished part and load a new one while the thermal assembly is taking place.

Part assembled using Toman ThermoSonics 2020 Thermal assembly system with a custom rotary table fixture

 

Ordering Information

Return to Custom Applications

 

 

 

 

 

Thank you for your interest in Toman ThermoSonics. www.TomanThermoSonics.com