Thermal Products

The 2020 Vision Series has been discontinued and replaced with the TBY077H and TBY079H models

2020 VISION Series (Discontinued)

These heat staking systems are advanced STATE-OF-THE-ART “SMART” Systems. The brain of these intelligent systems is an Embedded Microprocessor. This pneumatically-operated bench-top system’s Standard “Smart” Features Include:

  • 3–Post/In-Cycle Cool modes.
  • 2 Parts Counters; 1 resetable and 1 lifetime.
  • Program Memory for up to 5-different setup parameters and Maintenance Screen.
  • The systems Plug and Play intelligence allows for Instant change of machine operation between: Basic Machine Operation and Optional Slide Table and Our Standard 2 position Rotary Table.
  • The Maintenance Screen allows for easy troubleshooting of system operation. This feature shows the status of the inputs and outputs of the Embedded Microprocessor.
  • The adjustable Head Height includes a pair of column clamp handles and a counter balance spring, which make the head both light and easy to move.

Additional Features for the 2020 & 2020HD

  • 120 pounds of down force
  • Head table Head height, from 4” to 16”
  • Adjustable mechanical stop for fine tool adjustment
  • Digital dwell timers for repeatable process control for both the heat cycle and cool cycle
  • Adjustable Hydraulic Decelerator for controlled
    tooling advance
  • Dual, anti-tie-down, no-touch ergonomic actuation
  • 80-999 degree F operating range +/- 2 degree accuracy
  • Microprocessor-based, digital display temperature controller for accurate thermal process control
  • Standard Thermal Probe has built-in thermocouple
  • Non-asbestos insulator
  • 3” x 4” upper tooling platen
  • Cast Aluminum Base with E-Stop and fixture
    mounting holes
  • Air filter regulator and air flow controls to adjust up and down stroke speeds

Additional Features for the 2020HD only

  • 1/4 ton of down force
  • Heavy duty press allows for multiple staking or insertion

Power Requirements 110VAC, 50/60 Hz
Current draw @ full rated output: 5 amps
Pneumatic requirements Clean, dry air @ 100 psig
Maximum force (2020) 120 lbs. @ 100 psig
(2020HD) 500 lbs. @ 100 psig
Stroke Length 4” (10.16 cm)
Head adjustment 4’ to 16”
Weight 72 lbs.

TBY126 - 2020 Vision Unit with Probe

TBY127 - 2020HD Vision Unit with Probe

Ordering Information

Return to Thermal Products


Click here for Dimensions



Built-in Microprocessor for precise measurement and diagnostics

    Electrical connectors for dial table and slide table accessories.



Thank you for your interest in Toman ThermoSonics.