Thermal Products


The pneumatically-operated, bench top system develops 1/2 ton of down force and is ideal as a single point unit for large, insert or staking operations. As a stand-alone unit it is a natural for secondary operations at a molding press or assembly line. An input from the customer is required to start the cycle.


  • Adjustable mechanical stop for accurate tool adjustment
  • A microprocessor-based digital display controller for accurate temperature regulation
  • Dual ram speed for decreased cycle time
  • Digital readout, dwell timer for repeatable process control
  • Thermal probe with built-in thermocouple
  • 6" x 6" platen for upper tooling
  • 80-999 degree F. operating range +/-2 degree accuracy
  • Adjustable shock absorber for controlling tooling advance
  • Non-asbestos insulator; flow controls for adjustable stroke speeds; air filter regulator

Power requirements: 110 VAC, 50/60 Hz
Current draw @ full rated output: 10 amps
Pneumatic requirements: Clean, dry air @ 100 psig
Maximum Force: 1,200 lbs @ 100 psig
Stroke length: 4" (10.16 cm)
Weight: 320 lbs

CUSTOM (Quoted Upon Request)
Manual or Pneumatic Slide Table
Manual or Pneumatic Rotary Turntables
Additional automation per request
Ability to switch heater on/off for easy setup
Modular units without base or column for automation applications
Post cooling system
Part Hold Down Plungers
One additional zone

TBY095- 2030 Automation Unit with base
(Call to order)

TBY094- 2030 Automation Unit without base
(Call to order)

Ordering Information

Return to Thermal Products


Click here for BY094 Dimensions



Thank you for your interest in Toman ThermoSonics.