Ultrasonic Tooling

PNEUMATIC FILMFEEDER

The FilmFeeder will automatically feed a buffer film between the ultrasonic horn and the part being welded. This helps produce a smooth, unmarked product during ultrasonic welding. No more hand-fed plastic, and the savings in operation time or scrap parts will soon pay for this accessory.

FilmFeeder base slides under most sonic welders with no alterations. Adapter plates are available to widen up to 20".

  • Can be used with most manual or automated systems
  • Uses only compressed air; no electrical connections
  • Film automatically feeds at every stroke of the welder
  • Feed adjusts from 3/8" to 8" per stroke using the thumbscrew adjustment
  • Easy setup in less than 10 minutes
  • Lightweight and portable
  • Accepts film widths of two to six inches wide
  • Film available from Toman ThermoSonics

TSN029- Pneumatic Filmfeeder

TSN115- Optional FilmFeeder Adaptor Plates
(Call to Order)

 

 


 

 

 

 

Ordering Information

Return to Ultrasonic Tooling

 

 

 

Filmfeeder easily slides under most ultrasonic welders.

Why run film between your part and the horn?

Film acts as a buffer, protecting the surface from damage. This prevents marking or burning of the part during ultrasonic welding. If the appearance of the welded part is a factor, then a FilmFeeder is the right accessory for you. Choose the automatic unit or a manual unit, which can be upgraded to an automatic unit as your production increases.

 

 

Thank you for your interest in Toman ThermoSonics. www.TomanThermoSonics.com