This low-cost alternative to our Pneumatic FilmFeeder
manually feeds a buffer film between the ultrasonic horn and the part
being welded. The film is advanced by a ratcheting, film-advance lever
which can be operated from either side. Attach it to the take-up spool,
feeding left or right, according to the operator's preference. No more
loose plastic, and the savings in operation time or scrap parts will soon
pay for this accessory.
FilmFeeder base slides under most sonic welders with
no alterations. Adapter plates available to widen up to 20".
TSN105 - Manual FilmFeeder
TSN106 - Manual FilmFeeder
TSN115 - Optional FilmFeeder
Why run film between your part and the horn?
Film acts as a buffer, protecting the surface from damage. This prevents marking or burning of the part during ultrasonic welding. If the appearance of the welded part is a factor, then a FilmFeeder is the right accessory for you. Choose the automatic unit or a manual unit, which can be upgraded to an automatic unit as your production increases.