Ultrasonic Tooling

MODULAR, QUICK-CHANGE FIXTURES

This system was designed to reduce fixturing costs, minimize setup time, cut down on scrapped parts and decrease your overhead. Each of the five components (shown here) are designed to interchange using our unique coupling system. We design your part nests to couple with our modular system. This allows you to use any one of the components with your nest or to combine components depending on the welding application you need.  
   
 
     
 

Modular Base Plate

 Only one base plate is needed for all of your interchangeable nests and modules. Save yourself the cost of additional base plates on your new tooling needs. New nests can be designed to fit the quick-change system, or old nests can be easily modified, if desired. The base plate will accept nests up to six inches square (up to eight inches with our nest adapter). Just couple the nest, tighten the screws and you're ready to go. Use this base plate with all Toman Quick-Change Modules.

TSN080 - Modular Base Plate

     
 

Pop-Up Module

The pop-up feature aids in difficult part removal during welding applications. Use the Pop-Up Module on the Modular Base Plate. Your pop-up nest can be interchanged with this system. Save money by eliminating the need for a pop-up base for every nest.

TSN081 - Pop-Up Module

 

     
 

Hydraulic Squaring Module

The Hydraulic Squaring Module contains the same squaring system as our full-size Hydraulic Squaring Base. Use it on the Modular Base Plate for quick welder setups. The modular unit is smaller in size and incorporates the quick-change capability. Attach your quick-change nest to the Hydraulic Squaring Module to insure an improved weld through the automatic squaring of each part. It's less expensive than a full-size base with the added bonus of the quick-change feature. It's great for small parts.

TSN082- Hydraulic Squaring Module

     
 

Hydraulic Squaring/Pop-Up Module

With this module you get automatic leveling and a manual pop-up in a shorter, more compact unit. It incorporates the quick-change capability, thus, reducing future fixturing costs. It's less expensive than the individual components sold separately. Just mount it on the Modular Base Plate and attach your pop-up nest.

TSN083 - Hydraulic Squaring/Pop-Up Module

     
 

Mechanical Squaring Module

The Mechanical Squaring Module contains the same leveling system as our full-size, 8"x8" squaring base. The modular unit is smaller and less expensive but still incorporates the quick-change capability. Attach your quick-change nest to the squaring module and base plate to insure an improved weld through the automatic squaring of each part.

TSN114 - Mechanical Squaring Module

     
Examples of Modular, Quick Change Fixture Combinations
 

 

Ordering Information

Return to Ultrasonic Tooling

 

 

 

Thank you for your interest in Toman ThermoSonics. www.TomanThermoSonics.com