Thermal Products

ROTARY TABLES

Pneumatic Rotary Table
The Two-Station pneumatic Rotary Table, made to fit the thermal assembly units can significantly reduce cycle times. The table automatically rotates 180 degrees each time the palm buttons are pressed, bringing the opposite nest under the head. Once the thermal
head comes down, the operator can release the palm buttons, remove the finished part and load a new part while assembly is taking place. The rotary table can achieve speeds almost equal to 4, 6 or 8 station dial tables, yet with only two nests required, it is more economical to tool.

Features

  • Accurate assembly using shot pin location
  • Adjustable stops with rubber cushion
  • Flow controls on cylinder
  • All adjustments in one location
  • Low torque for safety

This rotary table is considered a custom option and should be ordered at the time that you purchase your thermal machine. The shot pin locator and the two nests required for operation are not included but can be quoted separately. Installation on an existing thermal unit can also be quoted separately.


SPECIAL OPTIONS

  • Circular table tops allow mounting of two nest sets for quick tooling changes between similar parts. Unbolt table top, rotate to new nest set, bolt and begin.
  • Larger tables customized for large parts.

SPECIFICATIONS
Pneumatic requirements: Clean, dry air @ 60 psig
Piston diameter: 21mm
Weight: 20 lbs
Port size: 1/8 npt


TBY107 - Two-Station Pneumatic Rotary Table

 

The Pneumatic Rotary Table automatically rotates 180 degrees each time the palm buttons on the 2020 are pressed. This allows the operator to remove the finished part and load a new one while the thermal assembly is taking place.(Pictured above is TBY077 with manual rotary table)

 
 

Manual Rotary Table
The Manual Rotary Table, made to fit the thermal assembly units is an economical solution to reducing cycle times. The table manually rotates 180 degrees each time the operator rotates the handle, bringing the opposite nest under the head. Once the thermal head comes down, the operator can release the palm buttons, remove the finished part and load a new part while assembly is taking place.

This rotary table is considered a custom option and should be ordered at the time that you purchase your thermal machine.

Features

  • Durable handle
  • Heavyduty bearing constuction

SPECIFICATIONS
Weight: 18 lbs


TBY115 - Manual Rotary Table

 
 

Ordering Information

Return to Thermal Products

   

 

Thank you for your interest in Toman ThermoSonics. www.TomanThermoSonics.com