Spin Welding Assembly System
This Spin Welding system automatically attaches endcaps onto plastic tubing.
It can handle tubes up to 12 in diameter and is easily adjustable
for tube lengths from 12 to 56. The welds are a hermetic seal.
The system features a control panel, spin welder and a safety enclosure.
The cycle begins automatically once the door is closed. The pneumatic
clamp closes and holds the part in place, and the head comes down and
completes the spin weld. The door is then unlocked at the end of the cycle.
The 8 diameter tube shown here had a load-to-load cycle time of
5 to 6 seconds.
||Closeup of the spin
welders head, assembling an 8 plastic tubing with endcap and
Return to Custom Applications